Category Archives: C/C++
Today I did some testing on the maximum blink frequency I could get out of the VoCore using the „sysfs„ GPIO interface. I used four different candidates: A shell script A Python 2.7 program, basically the one described here (gist) A Micropython program, more or less the same as the above, but using native libc […]
Added a setup-script to cross-compile the Linux kenel module for the RC outlets for the Raspbarry Pi. To be able to cross-compile the module, in brief the following needs to be done: Install ARM cross-gcc On Ubuntu: sudo apt-get install gcc-arm-linux-gnueabi make ncurses-dev Get RasPi Kernel E.g. use Kernel from GIT: git clone https://github.com/raspberrypi/linux.git linux-raspberrypi […]
Made a overview of how the over-air protocol looks for the Pollin RC Switches (see previous article for more details). The length of the pulses is a multible of 350us. The wave-forms where captured with an OpenBench logic sniffer.
Some time ago, I wrote about using an EDIMAX Smart Plug with Python. The EDIMAX has build in Wifi and runs its own web server. While this is convenient, it also makes the EDIMAX quiet expensive. Lately I got notice (thanks Eric), about very cheap 434MHz based plugs sold by Pollin for less then 10 […]
Also long time ago finished: the master bricks PCB and large parts of the firmware. Currently the MB is already able to drive the DIO and DCM bricks (multible of them). As before, I designed schematic and PCB using fritzing and ordered the PCBs from fritzing FAB. Currently I have not designed a case for the MB (since I […]
The DIO (Digital IO) brick for my brick-o-lage project is already finished. I designed schematic and PCB using fritzing . Also I ordered the PCBs from fritzing FAB (and they turned out great). For the firmware I used my own libemb as a basis. DIO Brick Specifications Uses a MSP430G2553 from TI Runs custom firmware […]
A while ago, I started a new project trying to create different „smart“ bricks which will interconnect with some other well known brick systems (e.g. Lego). By „smart“ bricks, bricks are meant which are able to perform a certain functionality like driving LEDs, detecting button presses, control DC motors or servos, read sensors and so […]