Monthly Archives: November, 2014

VoCore, Micropython, more Blinking

Lately I measured the maximum frequency I could get out of the VoCore by toggling a GPIO as fast as possible using various approaches. Today I wrote a simple Kernel module which allows me to set/clear a GPIO through IOCTL. Also I created a FFI binding to IOCTL for micropython and the usual test program […]

VoCore Maximum Blink Frequency

Today I did some testing on the maximum blink frequency I could get out of the VoCore using the „sysfs„ GPIO interface. I used four different candidates: A shell script A Python 2.7 program, basically the one described here (gist) A Micropython program, more or less the same as the above, but using native libc […]

VoCore, Micropython and the SYSFS

As I wrote a while ago I was not able to access the Kernels SYSFS through the build-in „open/read/write“ methods from micropython. I thought this might be because of the old version of micropython which comes from the OpenWrt binary repository, but even rebuilding OpenWrt did’t change anything. Then I realized, there is FFI (foreigen […]

Simple Snap-In Case for Hacklace2 v2.0

I refined the previous case a little to have less height and rounded corners. Looks much lighter now. The new design could be found on thingiverse as usual.

VoCore Arrived

Today my VoCore modules arrived from China (they are amazingly tiny). So time for a first LED blink right? Ok, I wanted to get things working quickly so I decided to go with the pre-installed OpenWrt and Python + sysfs. Unfortunately there is not Python on the device, and also the right package sources are […]

Simple Snap-In Case for Hacklace2

Just created a simple snap-in case for the Hacklace2. Two versions are provided: One which houses a Hacklace2 with soldered on headers, one which houses a Hacklace2 without headers. The OpenSCAD sources and printable STL files could be found on thingiverse.