Tag Archives: RC Switch
I added a Verilog receiver module to my FPGA based RC switch. With this module it is possible to receive RC switch commands from a remote, or from an other FPGA running the the Verilog for sending RC commands. For demonstration I made a simple example which uses one of the build in LEDs of […]
Wrote a simple Verilog module to operate a 434MHz RC switch from an FPGA. Basically this is a personal exercise of mine to get familiar with Verilog HDL. If you interested in a more practical approach on operating a 434MHz switch, see for example this article. For some theory on the protocol to operate the […]
Added a setup-script to cross-compile the Linux kenel module for the RC outlets for the Raspbarry Pi. To be able to cross-compile the module, in brief the following needs to be done: Install ARM cross-gcc On Ubuntu: sudo apt-get install gcc-arm-linux-gnueabi make ncurses-dev Get RasPi Kernel E.g. use Kernel from GIT: git clone https://github.com/raspberrypi/linux.git linux-raspberrypi […]
Made a overview of how the over-air protocol looks for the Pollin RC Switches (see previous article for more details). The length of the pulses is a multible of 350us. The wave-forms where captured with an OpenBench logic sniffer.
Some time ago, I wrote about using an EDIMAX Smart Plug with Python. The EDIMAX has build in Wifi and runs its own web server. While this is convenient, it also makes the EDIMAX quiet expensive. Lately I got notice (thanks Eric), about very cheap 434MHz based plugs sold by Pollin for less then 10 […]